Heat Storage for 7600

Cast iron wood stove with heat storage
Here is a beautiful wood stove in the 7600 series that does not compromise with the design. The stove gives off heat many hours after the fire has gone out. Thus, the fire wood is utilised efficiently because the heat, which is produced in the environment-friendly burn chamber, is accumulated in the heat-storing stones in the top of the stove. This swan-marked woodstove heats up to 120 square metres.

Heat storage module for Monica Ritterband wood stoves

All the stoves in the 7600 series may be enhanced with a top module. The top module may be purchased alone just to obtain a tall stove. A heat storage system with 2 stones (40 kg) may be installed in the top module. A regulation device controls the heat distribution so that either all heat goes to the room or it goes to both the room and the stones.

If the stove is installed with the flue pipe to the rear, an optional 12 kg of heat-accumulating stone may be added to bring the total of heat-storing stones in the top of the stove to 52 kg.

Heat Storage effect:

The heat-accumulating stones are concealed in the top of the stove, shown here in a Morsø 7690.

Rated output
Height	263 mm
Width	461 mm
Depth	461 mm
Log Length

Technical details
Height	263 mm
Width	461 mm
Depth	461 mm
Weight	52 kg